**Comprehensive**

- The comprehensive is conducted for students who have satisfactorily completed all the courses of the program.
- The objective of the comprehensive is to test the student’s capability to comprehend the entire program.
- It consists of a written test of three hours, a practical session and an oral examination which is conducted by a board consisting of academics and practitioners.
- The comprehensive is graded and the students must obtain a passing grade to qualify.
- The students must take comprehensive to fulfill the requirements of the program.
- The comprehensive is a pre-requisite to practicum.

**Practicum**

Department of Electrical and Electronic Engineering (DEEE) places great emphasis on the value of practical work experience in all professional degree programs. Besides, the hands-on experience gained in laboratories and workshops, BSEEE students are required to work as internees in a real life organization. In the fourth year of study, BSEEE students will attach as interns with suitable organizations. This internship is an integral component of BSEEE program, with 6 credit hours weight.

**Academic Guidance & Counseling**

- The facilities of counseling and guidance are available to students under the leadership of qualified psychologists.
- This service is provided under the Counseling and Guidance Centre of IUBAT.
- Although this is primarily a counseling service, therapy to a limited extent is provided as and when needed.

**Community Services**

- Contribute to HRD and community services in general
- Multidisciplinary professional consultancy
- Multidisciplinary and market oriented professional training

**Program Fees**

IUBAT assesses fees for students on credit hour basis. Fees and refundable library and laboratory deposits in details have been provided in the financial information section of this bulletin.

This section also provides information on financing arrangement including merit-scholarships at the point of admission, in-course fee waiver scholarship, different scholarships, on-campus work opportunities, financial assistance in the form of grants, installment payment, deferred payment student loan etc. The standing IUBAT policy to cater to needs of all qualified students who aspire for higher professional education regardless of the income level of his/her family through appropriate educational financing arrangement under the concept *Knowledge Based Area Development: A Step Towards Community Self-Reliance* applies to BSEEE program.

The Financial Information section also contains information on tuition fees for international students and special fees for students from SAARC countries and Least Developed Countries (LDC) of Asia and Africa.

**Duration of Study**

The minimum requirement for BSEEE degree is completion of 156 credit hours and usually requires 4 years to complete for a full time student. It is possible to graduate earlier with additional course load. However, most students will require 4 years to complete the requirements of the program. The curriculum is designed to give students general education background, foundation courses, exposure to basic sciences and engineering and specialization in electrical and electronics engineering. The first year courses are designed to develop the student’s language ability, mathematical ability and reasoning ability. The second year covers background courses of engineering and courses required to develop the knowledge about the need of the society and utilize these to fix personal goals. The third and fourth year courses are designed to expose students to engineering disciplines and specialize in electrical and electronics engineering.

To prepare a student for the electrical and electronic engineering profession, the curriculum for Bachelor of Science in Electrical and Electronic Engineering (BSEEE) provides a strong background in circuits, electrical power, electromagnetic field, electronics, digital electronics, micro-processor, electrical machines, computers, control systems, signal processing and solid devices, etc.

**Requirements for Graduation**

The BSEEE degree will be conferred only to the student who has fully complied with the graduation requirements and has applied for it. The requirements are that the student has:

- Completed all the prescribed courses with a minimum of 156 credit hours plus such courses recommended by the department after reviewing individual background.
- Earned at least ‘C’ grades in each of the core, specialization courses and English courses.
- Earned at least passing grade (D) in each of the remaining courses.
- Fulfillment of English language requirement through English Language Competency Test (ELCT)
- Earned a cumulative grade point average (CGPA) of 2.5.
- Earned at least a passing grade in the practicum.
- Earned at least a passing grade in the thesis.
- Earned at least a passing grade in the comprehensive
- Satisfactory behavior and discipline
- Library and financial clearance from the college and the university

**Course Offerings**

The offerings consist of the following courses with some options in agriculture and other disciplines.

### Humanities and Social Sciences

Humanities and Social Sciences | ||
---|---|---|

Students must take following courses from the following courses: | ||

Course Code |
Course Name |
Credits |

ART 102 | Educational Planning | 1 |

ART 103 | Professional Etiquette and Grooming | 0 |

ART 202 | Career Planning and Development-I | 1 |

ART 203 | Career Planning and Development-II | 1 |

ART 204 | Modern Living | 3 |

ENG 101 | Basic English Composition | 4 |

ENG 102 | English Comprehension and Speaking | 3 |

ENG 203 | Advanced English Compositions | 3 |

ENG 002 | English Language Proficiency | 0 |

ENG 250 | Public Speaking | 3 |

Students must take any one from the following courses: | ||

PHI 114 | Introduction to Philosophy | 3 |

PSY 105 | General Psychology | 3 |

ENV 101 | Environmental Science | 3 |

BDS 201 | Bangladesh Studies | 3 |

ECO 101 | Principles of Microeconomics | 3 |

### Physical Sciences

Physical Sciences | ||
---|---|---|

Students my take the following courses from physical sciences: | ||

Course Code |
Course Name |
Credits |

CHM 115 | General Chemistry | 3 |

CHM 116 | Chemistry Lab | 1 |

PHY 111 | Physics | 3 |

PHY 112 | Physics Lab | 1 |

PHY 121 | Advanced Physics | 3 |

MAT 147 | Applied Calculus | 3 |

MAT 167 | Calculus I | 3 |

MAT 197 | Calculus II | 3 |

MAT 219 | Linear Algebra | 2 |

MAT 237 | Calculus III | 3 |

MAT 247 | Numerical Analysis | 3 |

STA 240 | Statistics | 3 |

### Engineering Core

Engineering Core | ||
---|---|---|

Course Code |
Course Name |
Credits |

CSC 103 | Fundamentals of Computers and Applications | 3 |

CSC 104 | Computer Applications Lab | 1 |

CSC 183 | Programming C | 3 |

CSC 184 | Programming C Lab | 1 |

MEC 120 | Engineering Drawing | 1 |

MEC 173 | Introduction to Mechanical Engineering | 3 |

EEN 183 | Circuit Analysis I | 3 |

EEN 184 | Circuit Analysis I Lab | 1 |

EEN 251 | Engineering Ethics | 1 |

EEN 225 | Circuit Analysis II | 3 |

EEN 226 | Circuit Analysis II Lab | 1 |

EEN 257 | Electrical Machines I | 3 |

EEN 258 | Electrical Machines I Lab | 1 |

EEN 265 | Electronic Analysis and Design I | 3 |

EEN 266 | Electronics Analysis and Design I Lab | 1 |

EEN 275 | Electric and Magnetic Fields | 3 |

EEN 287 | Electrical Machines II | 3 |

EEN 288 | Electrical Machines II Lab | 1 |

EEN 303 | Linear Circuits and Systems | 3 |

EEN 315 | Electronic Circuit Analysis and Design II | 3 |

EEN 316 | Electronics Circuit Analysis and Design II Lab | 1 |

EEN 329 | Digital Logic Design | 3 |

EEN 330 | Digital Logic Design Lab | 1 |

EEN 347 | Electrical Properties of Materials | 2 |

EEN 348 | Electrical Wiring and Estimation | 1 |

EEN 431 | Communication | 1 |

EEN 432 | Communication Lab | 1 |

EEN 361 | Power Transmission and Distribution | 3 |

EEN 373 | Microprocessor Systems and Interfacing | 3 |

EEN 374 | Microprocessor Interfacing Lab | 1 |

EEN 403 | Digital Signal Processing | 3 |

EEN 404 | Digital Signal Processing Lab | 1 |

EEN 407 | Feedback Control System Analysis and Design | 3 |

EEN 408 | Feedback Control System Analysis and Design Lab | 1 |

EEN 413 | Project Evaluation, Planning and Management | 3 |

EEN 453 | Power System Analysis | 3 |

EEN 454 | Power System Analysis Lab | 1 |

EEN 455 | Power Stations | 3 |

EEN 488 | Thesis | 6 |

EEN 490 | Practicum | 6 |

### Specialization

Specialization | ||
---|---|---|

Specialized courses have been divided into groups A and B. Students must take 8 credits from Group A and 4 credits from Group B and vice-versa. | ||

Group – A | ||

Course Code |
Course Name |
Credits |

EEN 405 | Industrial Electronics | 3 |

EEN 406 | Industrial Electronics Lab | 1 |

EEE 441 | Industrial Electronics Lab | 1 |

EEN 442 | Measurement and Instrumentation | 1 |

EEN 463 | Switch gear and Protective Relays | 3 |

EEN 464 | Switch gear and Protective Relays Lab | 1 |

EEN 469 | High Voltage Engineering | 3 |

EEN 470 | High Voltage Engineering Lab | 3 |

EEN 473 | Renewable Energy | 3 |

EEN 474 | Renewable Energy Lab | 1 |

EEN 475 | Advanced Electrical Machines | 3 |

EEN 476 | Advanced Electrical Machines Lab | 1 |

Group – B | ||

Course Code |
Course Name |
Credits |

EEE 443 | Brain Engineering | 3 |

EEN 444 | Brain Engineering Lab | 1 |

EEE 449 | Optoelectronics | 3 |

EEE 459 | Semiconductor Device and Fabrication Techniques | 3 |

EEE 471 | Digital and Satellite Communication Engineering | 3 |

EEN 472 | Digital and Satellite Communication Engineering Lab | 1 |

EEE 477 | DSP Embedded System | 3 |

EEE 478 | DSP Embedded System Lab | 3 |

EEE 479 | Microwave Engineering | 3 |

EEE 480 | Microwave Engineering Lab | 1 |

EEE 481 | Optical Fiber Communication | 3 |

EEN 482 | Optical Fiber Communication Lab | 1 |

EEE 483 | VLSI Design | 3 |

EEN 484 | VLSI Design Lab | 1 |

EEN 485 | Robotics and Automation Engineering | 3 |

EEN 486 | Robotics and Automation Engineering Lab | 1 |

### Suggested Course Sequence : Semester 1

Semester 1 | ||
---|---|---|

Courser Code |
Courser Name |
Credits |

ART 102 | Educational Planning | 1 |

ENG 101 | Basic English Composition | 4 |

PHY 111 | Physics | 3 |

CSC 103 | Fundamentals of Computer and Applications | 3 |

CSC 104 | Computer and Applications Lab | 1 |

ART 204 | Modern Living | 3 |

Total |
15 |

### Suggested Course Sequence : Semester 2

Semester 2 | ||
---|---|---|

Courser Code |
Courser Name |
Credits |

ENG 102 | English Comprehension and Speaking | 3 |

PHY 121 | Advanced Physics | 3 |

PHY 112 | Physics Lab | 1 |

ART 202 | Career Planning and Development-I | 1 |

EEE 183 | Circuit Analysis I | 3 |

EEE 184 | Circuit Analysis I Lab | 1 |

MAT 147 | Applied Calculus | 3 |

Total |
15 |

### Suggested Course Sequence : Semester 3

Semester 3 | ||
---|---|---|

Courser Code |
Courser Name |
Credits |

CHM 115 | General Chemistry | 3 |

CHM 116 | Chemistry Lab | 1 |

MAT 167 | Calculus I | 3 |

EEE 225 | Circuit Analysis II | 3 |

EEE 226 | Circuit Analysis II Lab | 1 |

CEN 120 | Engineering Drawing | 1 |

ENG 203 | Advanced English Compositions | 3 |

Total |
15 |

### Suggested Course Sequence : Semester 4

Semester 4 | ||
---|---|---|

Courser Code |
Courser Name |
Credits |

CSC 183 | Programming C | 3 |

CSC 184 | Programming C Lab | 1 |

MAT 197 | Calculus II | 3 |

EEE 265 | Electronic Analysis and Design I | 3 |

EEE 266 | Electronic Analysis I Lab | 1 |

ENV101 | Environmental Science | 3 |

Total |
14 |

### Suggested Course Sequence : Semester 5

Semester 5 | ||
---|---|---|

Courser Code |
Courser Name |
Credits |

MAT 219 | Linear Algebra | 2 |

EEE 215 | Engineering Ethics | 1 |

EEE 257 | Electrical Machines I | 3 |

EEE 258 | Electrical Machines I Lab | 1 |

EEE 315 | Electronic Analysis and Design II | 3 |

EEE 316 | Electronic Analysis II Lab | 1 |

ENG 250 | Public Speaking | 3 |

ENG 002 | English Language Proficiency | 0 |

Total |
14 |

### Suggested Course Sequence : Semester 6

Semester 6 | ||
---|---|---|

Courser Code |
Courser Name |
Credits |

EEE 275 | Electric and Magnetic Fields | 3 |

EEE 287 | Electrical Machines II | 3 |

EEN 288 | Electrical Machines II Lab | 1 |

MEC 173 | Introductions to Mechanical Engineering | 3 |

MAT 237 | Calculus III | 3 |

EEN 348 | Electrical Wiring and Estimation | 1 |

Total |
14 |

### Suggested Course Sequence : Semester 7

Semester 7 | ||
---|---|---|

Courser Code |
Courser Name |
Credits |

EEE 453 | Power System Analysis | 3 |

EEE 454 | Power System Analysis Lab | 1 |

EEE 329 | Digital Logic Design | 3 |

EEE 330 | Digital Logic Design Lab | 1 |

EEE 303 | Linear Circuit and Systems | 3 |

MAT 247 | Numerical Analysis | 3 |

Total |
14 |

### Suggested Course Sequence : Semester 8

Semester 8 | ||
---|---|---|

Courser Code |
Courser Name |
Credits |

EEE 347 | Electrical Properties of Material | 2 |

EEN 361 | Power Transmission and Distribution | 3 |

EEN 407 | Feedback Control System | 3 |

EEE 408 | Feedback Control System and Design Lab | 1 |

EEN 373 | Microprocessor Systems Interfacing | 3 |

EEN 374 | Microprocessor Systems Interfacing Lab | 1 |

Total |
13 |

### Suggested Course Sequence : Semester 9

Semester 9 | ||
---|---|---|

Courser Code |
Courser Name |
Credits |

EEE 413 | Project Evaluation,Planning and Management | 3 |

EEE 455 | Power Stations | 3 |

Major 1 | 3 | |

Major 1 Lab | 1 | |

Minor 1 | 3 | |

Minor 1 | 1 | |

Total |
14 |

### Suggested Course Sequence : Semester 10

Semester 10 | ||
---|---|---|

Courser Code |
Courser Name |
Credits |

Major 2 | 3 | |

Major 2 Lab | 1 | |

STA 240 | Statistics | 3 |

ART 203 | Career Planning and Development-II | 1 |

EEE 488 | Thesis-I | 3 |

Total |
11 |

### Suggested Course Sequence : Semester 11

Semester 11 | ||
---|---|---|

Courser Code |
Courser Name |
Credits |

EEE 403 | Digital Signal Processing | 3 |

EEE 404 | Digital Signal Processing Lab | 1 |

EEE 431 | Communication Theory | 3 |

EEE 432 | Communication Lab | 1 |

EEE 488 | Thesis-II | 3 |

Total |
11 |

### Suggested Course Sequence : Semester 12

Semester 12 | ||
---|---|---|

Courser Code |
Courser Name |
Credits |

EEN 490 | Practicum | 6 |

Total |
6 |

**Descriptions of Courses**

Description of the Electrical and Electronic engineering courses are given below, while the descriptions of the courses of other areas can be found under respective colleges.

### EEN 183 CIRCUIT ANALYSIS I [3]

P. PHY 111:

Series and parallel circuits, Series-Parallel Networks; Methods of analysis: Mesh analysis, Node analysis and other methods of analysis; Kirchhoff’s laws, Y-delta transformation; Circuit theorems: Superposition Theorem, Norton’s Theorem, Thevenin’s Theorem, Millman’s Theorem Capacitors, Inductors, R-C and R-L circuits with DC excitation. Alternating current – AC quantities, Sinusoidal alternating wave forms, Phasors, AC circuit analysis – RC, RL, RLC series and parallel circuits.

### EEE 184 CIRCUIT ANALYSIS I LAB [1]

### EEN 225 CIRCUIT ANALYSIS II [3]

P. EEE 183: Series-parallel ac networks, Network theorems, Dependent sources, Resonance and Q-factors, Power and power factors, Power Factor Improvement, Poly-phase systems – balanced and unbalanced, Problem solving Poly phase power measurement, Whitstone bridge measurement system, Coupled circuits, various passive filter circuits, Magnetic circuits.

### EEE 226 CIRCUIT ANALYSIS II LAB [1]

### EEE 215 ENGINEERING ETHICS [1]

Definition and scopes of Ethics, Different branches of Ethics, Social change and the emergence of new technologies, History and development of Engineering Ethics, Science and Technology- necessity and application, Study of Ethics in Engineering. Applied Ethics in engineering.

Human qualities of an engineer, Obligation of an engineer to the clients, Attitude of an engineer to other engineers, Measures to be taken in order to improve the quality of engineering profession.

Ethical Expectations: Employers and Employees; inter-professional relationship: Professional Organization- maintaining a commitment of Ethical standards. Desired characteristics of a professional code, Institutionalization of Ethical conduct

### EEE 257: ELECTRICAL MACHINE I [3]

P. EEE 225: Transformer: Construction, Principle of operation, Ideal transformer- transformation ratio, no-load and load vector diagrams, equivalent circuit, Voltage regulation, Ratings, short circuit and open circuit tests, Introduction to 3-phase transformer. Three phase induction motor: Construction, Principle of operation, Rotating magnetic field, equivalent circuit, vector diagram, torque-speed characteristics, effect of changing rotor resistance and reactance on torque-speed curves, motor torque and developed rotor power, no-load test, blocked rotor test, starting and braking and speed control. Single phase induction motor: Theory of operation, equivalent circuit and starting.

### EEE 258: ELECTRICAL MACHINE I LAB [1]

### EEE 265 ELECTRONIC ANALYSIS AND DESIGN I [3]

P. PHY 121: Introduction to semiconductors, Intrinsic and extrinsic semiconductors, p-type and n-type semiconductors, Drift current and diffusion current in semiconductors. The p-n junction diode: The p-n junction, Formation of depletion layer and junction or Barrier potential in a p-n junction, p-n junctions under forward and reverse biases, Junction Breakdown-Zener and Avalanche breakdown, the p-n junction diode, The ideal diode and real diode, Load line analysis of diode circuits, graphical analysis of diode circuits, equivalent circuits and frequency response, diode applications –Ideal rectifier concept, half and full wave rectifier circuits, Voltage doublers, Clipping and clamping circuits, characteristics of different types of diodes – zener, tunnel, schottky and photo diodes, Zener diode voltage regulator, Zener diode voltage regulator, Bipolar Junction Transistors (BJT): Bipolar junction transistor-Construction and Operation, I-V characteristics, Amplifying action, Common-base (CB), Common-collector (CC) and Common-emitter (CE) configurations, Thermal runway and stability factor of a transistor, Input, output and current transfer characteristics of CB, CC and CE configuration of transistors, Different methods of transistor biasing, Darlington pair, Load Line (AC and DC), BJTs at low frequencies – hybrid model, h-parameters, small signal analysis of BJT amplifiers, high input impedance circuits.

### EEE 266 ELECTRONICS I LAB [1]

### EEE 275: ELECTRIC AND MAGNETIC FIELDS [3]

P. MAT 237: Static electric field: Postulates of electrostatics, Gauss’s law and its application, electric potential due to charge distribution, conductors and dielectrics in static electric field, flux density- boundary conditions; capacitance- electrostatic energy and forces, energy in terms of field equations, capacitance calculation of different geometries; boundary value problems- Poisson’s and Laplace’s equations in different co-ordinate systems. Steady electric current: Ohm’s law, continuity equation, Joule’s law, resistance calculation. Biot-Savart’s law, Ampere’s law and applications. Boundary conditions for magnetic field, magnetic energy, magnetic forces, torque and inductance of different geometries. Time varying fields and Maxwell’s equations: Faraday’s law of electromagnetic induction, Maxwell’s equations – differential and integral forms, boundary conditions, potential functions; time harmonic fields and Poynting theorem. Plane electromagnetic wave: plane wave in loss less media- Doppler effect, transverse electromagnetic wave, polarization of plane wave; plane wave in lossy media- low-loss dielectrics, good conductors; group velocity, instantaneous and average power densities, normal and oblique incidence of plane waves at plane boundaries for different polarization.

### EEE 287: ELECTRICAL MACHINE II [3]

P. EEE 257: Synchronous Generator: excitation systems, equivalent circuit, vector diagrams at different loads, factors affecting voltage regulation, synchronous impedance, synchronous impedance method of predicting voltage regulation and its limitations. Parallel operation: Necessary conditions, synchronizing, circulating current and vector diagram. Synchronous motor: Operation, effect of loading under different excitation condition, effect of changing excitation, V-curves and starting. DC generator: Types, no-load voltage characteristics, build-up of a self excited shunt generator, critical field resistance, load-voltage characteristic, effect of speed on no-load and load characteristics and voltage regulation. DC motor: Torque, counter emf, speed, torque-speed characteristics, starting and speed regulation. Introduction to wind turbine generators Construction and basic characteristics of solar cells.

### EEE 288: ELECTRICAL MACHINE II LAB [1]

### EEE 303: LINEAR CIRCUITS AND SYSTEMS [3]

P EEE 225 & MAT 219: Characteristics of linear systems, Differences between linear and nonlinear electrical circuits, Methods of transient and steady state solutions of differential and integro-differential equations, Frequency response of LTI systems, Analysis by Fourier Transformation, Laplace Transformation and its applications to linear circuits, Taylor series application to electrical circuits, Analogous systems, Unit step function, Impulse function, convolutions integral and their applications, Introduction to discrete signal processing−Z transform, Z- transform analysis of LTI systems.

### EEE 315: ELECTRONIC ANALYSIS AND DESIGN II [3]

P. EEE 265: Field effect transistors (FET): Types of FET, Construction, principles of operation, characteristic curve, Channel conductivity, Channel ohmic and pinch-off region, characteristic parameter of the FET, MOSFET- depletion and enhancement type, n- and p- channels, Biasing arrangements, Basic FET amplifiers. Use of FET as voltage controlled switches and resistors, feedback amplifiers with different topologies, stability, frequency compensation, Oscillators, Multi-vibrators, Introduction to IC technology.

Difference amplifier, Signal generators: Basic principle of sinusoidal oscillation, Op-Amp RC oscillators, LC and crystal oscillators. Power Amplifiers: Classification of output stages, class A, B and AB output stages, Ideal OP-AMP, Practical OP-AMP, Frequency response and noise of an OP-AMP, Bandwidth and other practical limitation of OPAMP, Inverting and Non-inverting amplifier, Linear applications of OP-AMP, The Comparator, Differentiator, Integrator, Instrumentation amplifier, CMMR, Active Filters, Low pass, High pass and Band pass Filters using op-amps, positive and negative feedback, Feedback amplifiers, Different kinds of Oscillators, Timer-555,VCO-566, Binary counter.

### EEE 316: ELECTRONICS II LAB [1]

### EEE 329: DIGITAL LOGIC DESIGN [3]

P. EEE 315: Number System, Digital logic: Boolean algebra, De Morgan’s Theorems, logic gates and their truth tables, canonical forms, combinational logic circuits, minimization techniques; Arithmetic and data handling logic circuits, decoders and encoders, multiplexers and demultiplexers; Combinational circuit design; Flip-flops, race around problems; Counters: asynchronous counters, synchronous counters and their applications; Memory and Programmable Logic design; Synchronous and asynchronous logic design; State diagram, Mealy and Moore machines; State minimizations and assignments; Pulse mode logic; Fundamental mode design, PLC.

### EEE 330: DIGITAL LOGIC LAB [1]

### EEE 347: ELECTRICAL PROPERTIES OF MATERIAL [2]

P EEE 315: Crystal structures: Types of crystals, lattice, and basis, Bravais lattice and Miller indices. Classical theory of electrical and thermal conduction: Scattering, mobility and resistivity, temperature dependence of metal resistivity, Mathiessen’s rule, Hall Effect and thermal conductivity. Band theory of solids: Band theory from molecular orbital, Bloch theorem, Kronig-Penny model, effective mass, density-of-states. Carrier statistics: Maxwell-Boltzmann and Fermi-Dirac distributions, Fermi energy. Modern theory of metals: Determination of Fermi energy and average energy of electrons, classical and quantum mechanical calculation of specific heat. Dielectric properties of materials: Dielectric constant, polarization- electronic, ionic and orientational; internal field, Clausius-Mosotti equation, spontaneous polarization, frequency dependence of dielectric constant, dielectric loss and piezoelectricity. Magnetic properties of materials: Magnetic moment, magnetization and relative permitivity, different types of magnetic materials, origin of ferromagnetism and magnetic domains. Introduction to superconductivity: Zero resistance and Meissner effect, Type I and Type II superconductors and critical current density.

### EEE 348: ELECTRICAL WIRING AND ESTIMATIONS [1]

P EEE 225 & CEN 120: Wiring system design, drafting, estimation. Design for illumination and lighting. Electrical installations system design: substation, BBT and protection, air-conditioning, heating and lifts. Design for intercom, public address systems, telephone system and LAN. Design of security systems including CCTV, fire alarm, smoke detector, burglar alarm, and sprinkler system. A design problem on a multi-storied building.

### EEE 361 POWER TRANSMISSION AND DISTRIBUTION [3]

P. EEE 225: The course deals with various elements of power transmission and distribution. Aspects dealt with include inductance of single & 3 phase lines, capacitance of two wires & 3 phase lines, transmission lines, transformers, line alternative, line protection and all the related design, development and maintenance issues.

The topics include: classification of transmission and distribution voltage levels and consumers. Transmission line – conductor types, insulators and potential distribution, sag and loading, lightning and ground wire, corona and its redaction. Transmission line resistance (DC and effective), calculation of inductance and capacitance – composite, bundled conductors and parallel circuit line, effect of earth in capacitance calculation. Equivalent circuits of short, medium and long line, SIL and Ferranti effect. Maximum receiving end power. Power, voltage and power factor control: tap changing transformers, phase shifting. Booster and regulating transformers, shunt capacitor, synchronous condenser, static VAR compensators (SVC). Insulated cables: comparison with overhead line, solid dielectric, crossed polyethylene (XPLE), oil and gas filled. Distribution systems: radial, ring mains and interconnected. Layout of a typical substations and familiarization with its protective devices. Introduction to harmonic generating utility and consumer devices, effects, total harmonic distortion (THD), harmonic reduction. High voltage DC transmission. FACT and STATCOM

### EEE 373: MICROPROCESSOR SYSTEMS AND INTERFACING [3]

P. EEE 329:.Introduction to 8-bit, 16-bit, and 32-bit microprocessor – architecture, addressing modes, instruction set, interrupts, multi-tasking and virtual memory – memory interface, bus interface, arithmetic co-processor, Microcontrollers, integrating microprocessors with interfacing chips.

### EEE 374: MICROPROCESSOR INTERFACING LAB [1]

### EEE 407: FEEDBACK CONTROL SYSTEM ANALYSIS AND DESIGN

P. EEE 303: Classical concepts of feedback system analysis and associated compensation techniques are presented. In particular, the root locus, Bode diagram, and Nyquist criterion are used as determinants of stability. P, I, D, P+I, P+D, PID control. Digital control, Use of concepts and techniques in real life systems, in particular, electrical and mechanical engineering systems. Design digital controllers.

### EEE 408: FEEDBACK CONTROL SYSTEM ANALYSIS AND DESIGN LAB

### EEE 403: DIGITAL SIGNAL PROCESSING [3]

P. EEE 303: Introduction to digital signals and digital signal processing, A/D conversion, sampling theorem, Illustration of aliasing, analysis of Discrete-Time Linear-Tme-Invariant (LTI) systems, Resolution of Discrete-Time signals into impulse, Convolution and correlation, Z-transform, Concept of Pole and Zero, Frequency domain representation of discrete-time systems and signals, Discrete Fourier series and discrete Fourier transform (DFT), computation of the DFT, Fast Fourier Transform (FFT), Discrete Cosine Transform (DCT), Signal flow graph representation of digital networks. Filter structure for IIR and FIR filters, Introduction to speech and Image processing.

### EEE 404: DIGITAL SIGNAL PROCESSING LAB

### EEE 431: COMMUNICATION THEORY [3]

P. EEE 345 Introduction: Principle, evolution, networks, exchange and international regulatory bodies. Telephone apparatus: Microphone, speakers, ringer, pulse and tone dialing mechanism, side-tone mechanism, local and central batteries and advanced features. Switching system: Introduction to analog system, digital switching systems – space division switching, blocking probability and multistage switching, time division switching and two dimensional switching. Traffic analysis: Traffic characterization, grades of service, network blocking probabilities, delay system and queuing. Modern telephone services and network: Internet telephony, facsimile, integrated services digital network, asynchronous transfer mode and intelligent networks. Introduction to cellular telephony and satellite communication.

### EEE 432: COMMUNCATION LAB [1]

### EEE 453 POWER SYSTEM ANALYSIS [3]

P. EEE 361: Power Network representation: Single line and reactance diagram of power system and per unit. Line representation: equivalent circuit of short, medium and long lines. Load flow: Gauss- Siedel and Newton Raphson Methods. Power flow control: Tap changing transformer, phase shifting, booster and regulating transformer and shunt capacitor. Fault analysis: Short circuit current and reactance of a synchronous machine. Symmetrical fault calculation methods: symmetrical components, sequence networks and unsymmetrical fault calculation. Protection: Introduction to relays, differential protection and distance protection. Introduction to circuit breakers,

### EEE 454: POWER SYSTEM ANALYSIS LAB [1]

### EEE 455: POWER STATIONS [3]

P. EEE 453: Various Power plants general layout and principles, steam turbine: construction & operation, gas turbine: construction and operation, combined cycle gas turbine. Technical, economical and environmental factors. Load forecasting, Load factor calculation. Hydro based power plant, Nuclear Plant: principle of nuclear plant, components of a nuclear plant and operation. Future scopes of generating Electrical power, Power plant instrumentation. Deterministic and probabilistic. Electricity tariff: formulation and types. Introduction to renewable energy.

### EEE 413 PROJECT EVALUATION, PLANNING & MANAGEMENT [3]

P. MAT 147 & EEE 215:. Analysis of engineering proposals, utilizing time value of money and relevant factors. Alternative proposals. Cost elements involved in engineering products and projects; cost control. Project costing, feasibility criteria, cash flow, payback period, EUAC, present value criterion, future value criterion, internal rate of return, benefit-cost ratio; replacement studies. After-tax project evaluation.

Principles of management; project planning, scheduling and controlling, PERT, CPM, Resource scheduling; materials management. Psychology in administration.

Application of planning and management principles to fire protection and electrical engineering projects. Introduction to industry and construction management.

Introduction to optimization techniques used in managing mechanical and electrical engineering projects.

5s management, Time management, TPM management, Six Sigma Philosophy, LEAN Tools, How to conduct internal Audit, Production Planning, Fire and Safety Management, Industrial Wastage Management, How to ensure product quality in your manufacturing industries and Cost control technique

### EEE 405: INDUSTRIAL ELECTRONICS [3]

P EEE 347: Power semiconductor switches and triggering devices: BJT, MOSFET, SCR, IGBT, GTO, TRIAC, UJT and DIAC. Rectifiers: Uncontrolled and controlled single phase and three phase. Regulated power supplies: Linear-series and shunt, switching buck, buck boost, boost and Cuk regulators. AC voltage controllers: single and three phase. Choppers. DC motor control. Single phase cyclo converter. Inverters: Single phase and three phase voltage and current source. AC motor control. Stepper motor control. Resonance inverters. Pulse width modulation control of static converters.

### EEE 406: INDUSTRIAL ELECTRONICS LAB

### EEE 463: SWITCHGEAR AND PROTECTIVE RELAYS [3]

P EEE 453: Purpose of power system protection. Criteria for detecting faults: over current, differential current, difference of phase angles, over and under voltages, power direction, symmetrical components of current and voltages, impedance, frequency and temperature. Instrument transformers: CT and PT. Electromechanical, electronic and digital Relays: basic modules, over current, differential, distance and directional. Trip circuits. Unit protection schemes: Generator, transformer, motor, bus bar, transmission and distribution lines. Miniature circuit breakers and fuses. Circuit breakers: Principle of arc extinction, selection criteria and ratings of circuit breakers, types – air, oil, SF6 and vacuum.

### EEE 464: SWITCHGEAR AND PROTECTIVE RELAYS LAB [1]

Laboratory experiments based on EEE 463

### EEE 473: RENEWABLE ENERGY [3]

P EEE 361: Importance of renewable energy, sources; Statistics regarding solar radiation and wind speed; Insulation; geographical distribution, atmospheric factors, measurements; Solar cell; principle of operation, spectral response, factors affecting conversion efficiency, I_V characteristics, maximum power output; PV modules and arrays; stationary and tracking; PV systems; stand alone, battery storage, inverter interfaces with grid; Wind turbine generators; types; operational characteristics; cut-in and cut-out speed, control, grid interfacings, AC-DC -AC link

### EEE 474: RENEWABLE ENERGY LAB [1]

### EEE469: HIGH VOLTAGE ENGINEERING

P EEE 361: High voltage DC: Rectifier circuits, voltage multipliers, Van-de-Graaf and electrostatic generators. High voltage AC: Cascaded transformers and Tesla coils. Impulse voltage: Shapes, mathematical analysis, codes and standards, single and multi-stage impulse generators, tripping and control of impulse generators, Breakdown in gas, liquid and solid dielectric materials, Corona, High voltage measurements and testing, Over-voltage phenomenon and insulation coordination. Lightning and switching surges, basic insulation level, surge diverters and arresters.

### EEE 470: HIGH VOLTAGE ENGINEERING LAB [1]

### EEE 475: ADVANCED ELECTRICAL MACHINERY [3]

P EEE 288: Brushless DC Machines: Construction and working principle, Equivalent magnetic analysis, EMF and torque equations, Types of converter and speed control, Comparison between the axial and radial Permanent magnet motors, applications , Permanent magnet DC and AC motors, Applications, Stepper Motors: Constructional features – Principle of operation – Variable reluctance motor –Hybrid motor – Single and multi stack configurations – Theory of torque predictions – Linear and non-linear analysis – Characteristics – Drive circuits, Switched Reluctance Motor: Construction details and classification, Working principle, Equivalent circuit, Motor speed-torque characteristics and modification with advance angle and dwell angle variation, Position sensing, Converter topologies, Speed Control, Applications, Wind Mill Generator: Characteristics of wind power. Wind power parameters, Classification of wind mill generators, Configuration of variable slip wind turbine generator and Doubly Fed induction Generator, Other Special Machines: Principle of operation and characteristics of Hysteresis motor – AC series motors – Linear induction motor Applications

### EEE 476: ADVANCED ELECTRICAL MACHINERY LAB [1]

### EEE 441: MEASUREMENT AND INSTRUMENTATION [3]

P EEE 225: Measuring instrument: PMMC, Ammeters & Voltmeters. Current & Potential transformers, Extension of instrument range. Measurement of resistance: Wheatstone bridge, Kelvin Bridge, Voltmeter Ammeter method .Mega ohm meter. Measurement of capacitance and inductance, Localization of cable faults: Murray and varley loop test, capacitance test method, blavier’s test. Transducers: Potentiometer, strain gauge, thermistor, thermocouple, resistive transducer, capacitive, inductive, linear variable differential transformer, piezoelectric, Selection of transducer, application of transducers for measuring temperature, pressure flow, level and strain. Signal conditioning: block diagram of DC and AC signal conditioning systems, data acquisition and conversion system, Instrumentation amplifier, Introduction to telemetering system. Electronic measuring instrument: DVM, CRO, frequency and phase measurement

### EEE 442: MEASUREMENT AND INSTRUMENTATION LAB [1]

### EEE 479: MICROWAVE ENGINEERING [3]

P EEE 275: VHF, UHF and microwave frequency ranges. Transmission line, Smith chart, impedance transformation and matching. Waveguides: parallel plane, rectangular, co-axial, Waveguide components, cavities and resonators. Microwave tubes: transit time and velocity modulation, Klystron, multi cavity klystron, reflex klystron, oscillator, Magnetron, TWT, Backward wave oscillators (BWO).Introduction to solid state microwave devices. Radiation: Dipole and its analysis, radiation pattern, description of different types of antennas. Introduction to antenna arrays and their design.

### EEE 480: MICROWAVE ENGINEERING LAB [1]

### EEE 483: VLSI DESIGN [3]

P EEE 329: VLSI technology: terminologies and trends, MOS transistor characteristics and equations, MOS fabrication process, nMOS & CMOS inverters: dc & transient characteristics, pass transistor & pass gates, Derivation of drain-to source current (Ids), Ids VS Vds, Pull-up to pull down ratio, CMOS & nMOS design Style, Stick Diagrams, CMOS layout and design rules: λ-based design rule. Complex CMOS gates: NAND, NOR, EXclusive OR, Resistance & Capacitance estimation and Modeling, raise time and fall time calculation of gate capacitance, Scaling & scaling factor of different parameters. Signal propagation delay, noise margin and power consumption, Interconnect, BiCMOS circuits. CMOS building blocks: adders, counters, multipliers and barrel shifters, Parity generator, Data paths, memory structures: Dynamic RAM cells, PLAs and FPGAs, VLSI testing: objectives & strategies.

### EEE 484: VLSI DESIGN LAB [1]

### EEE 489: SEMICONDUCTOR DEVICES & FEBRICATION TECHNOLOGIES [3]

P EEE 315: Semiconductors in equilibrium: Energy bands, intrinsic and extrinsic semiconductors, Fermi levels, electron and hole concentrations, temperature dependence of carrier concentrations and invariance of Fermi level. Carrier transport processes and excess carriers: Drift and diffusion, generation and recombination of excess carriers, built-in-field, Einstein relations, continuity and diffusion equations for holes and electrons and quasi-Fermi level. PN junction: Basic structure, equilibrium conditions, contact potential, equilibrium Fermi level, space charge, non-equilibrium condition, forward and reverse bias, carrier injection, minority and majority carrier currents, transient and AC conditions, time variation of stored charge, reverse recovery transient and capacitance. Bipolar Junction Transistor: Basic principle of pnp and npn transistors, emitter efficiency, base transport factor and current gain, diffusion equation in the base, terminal currents, coupled-diode model and charge control analysis, Ebers-Moll equations and circuit synthesis. Metal-semiconductor junction: Energy band diagram of metal semiconductor junctions, rectifying and ohmic contacts. MOS structure: MOS capacitor, energy band diagrams and flat band voltage, threshold voltage and control of threshold voltage, static C-V characteristics, qualitative theory of MOSFET operation, body effect and current-voltage relationship of a MOSFET. Junction Field-Effect-Transistor: Introduction, qualitative theory of operation, pinch-off voltage and current-voltage relationship. Substrate materials: Crystal growth and wafer preparation, epitaxial growth technique, molecular beam epitaxy, chemical vapor phase epitaxy and chemical vapor deposition (CVD). Doping techniques: Diffusion and ion implantation. Growth and deposition of dielectric layers: Thermal oxidation, CVD, plasma CVD, sputtering and silicon-nitride growth. Etching: Wet chemical etching, silicon and GaAs etching, anisotropic etching, selective etching, dry physical etching, ion beam etching, sputtering etching and reactive ion etching. Cleaning: Surface cleaning, organic cleaning and RCA cleaning. Lithography: Photo-reactive materials, pattern generation, pattern transfer and metallization.

### EEE 471: DIGITAL AND SATELLITE COMMUNICATION [3]

P EEE 431: Introduction to Wireless Communication, Basic Wireless Theory, Components of a Radio System, Design of a Radio System, Understanding Standards and its necessity, Radio Frequency Spectrum, Infrared Networking Structures, Infrared WLAN, IrDA, Bluetooth, Low Speed WLAN, High Speed WLAN, WLAN Security, WiFi and WiMax. Introduction to communication using satellite, GEO, MEO and LEO satellites, Kepler’s law and orbital mechanics, satellite launching, Frequency spectra and band, Satellite subsystems, Satellite transponder, earth stations, earth station antenna, satellite link analysis, VSAT network, Satellite communication for Internet, Mobile satellite communications, Multiple Access Techniques: TDMA, FDMA and CDMA, Introduction to ISDN, B-ISDN.

### EEE 472 DIGITAL AND SATELLITE COMMUNICATION LAB [1]

### EEE 449: OPTOELECTRONIC DEVICES [3]

P EEE 315: Fundamental of Optical physics, Optical properties in semiconductor: Direct and indirect band-gap materials, radiative and non-radiative recombination, optical absorption, photo-generated excess carriers, minority carrier life time, luminescence and quantum efficiency in radiation. Properties of light: Particle and wave nature of light, polarization, interference, diffraction and blackbody radiation. Light emitting diode (LED): Principles, materials for visible and infrared LED, internal and external efficiency, loss mechanism, structure and coupling to optical fibers. Stimulated emission and light amplification: Spontaneous and stimulated emission, Einstein relations, population inversion, absorption of radiation, optical feedback and threshold conditions. Semiconductor Lasers: Population inversion in degenerate semiconductors, laser cavity, operating wavelength, threshold current density, power output, hetero-junction lasers, optical and electrical confinement. Introduction to quantum well lasers. Photo-detectors: Photoconductors, junction photo-detectors, PIN detectors, avalanche photodiodes and phototransistors. Solar cells: Solar energy and spectrum, silicon and Schottkey solar cells. Modulation of light: Phase and amplitude modulation, electro-optic effect, acousto-optic effect and magneto-optic devices, Introduction to integrated optics, Introduction to optical fiber.

### EEE 481: OPTICAL FIBER COMMUNICATION [3]

P EEE 449: Introduction to optical properties of light, Light propagation through optical fiber: Ray optics theory and mode theory. Optical fibers: Types and characteristics, modes of propagation, transmission characteristics, fiber joints and fiber couplers, waveguide analysis. Optical sources: Light Emitting Diode (LED) and semiconductor laser diode (SLD), Operational principles, characteristic curves, optical transmitter design using LED/SLD, Transmission limitations: Chromatic dispersion, nonlinear refraction, four wave mixing and laser phase noises, Optical Amplifiers: laser and fiber amplifiers, applications and limitation, Photo-detectors: P-i-N and avalanche photo detectors, Optical Modulation and detection schemes, direct and coherent detection receiver, Multi-channel optical system: Frequency division multiplexing, wavelength division multiplexing and co-channel interference, Optical data transmission in LAN, design of fiber-optic systems, optical networks.

### EEE 482: OPTICAL FIBER COMMUNICATION LAB [1]

### EEE 485: ROBOTICS AND AUTOMATION ENGINEERING [3]

P EEE 407: Spatial Descriptions, Direct Kinematics- the arm equation, Inverse Kinematics-solving the arm equation, Jacobian’s Dynamics, Motion Planning and Trajectory Generation, Position and Force Control, Manipulator Design, task planning.

### EEE 487: BIOMEDICAL ENGINEERING [3]

P EEE 403: The human body: an overview, forms of mammalian cells, bioelectricity, Electroconduction system of the heart, bioelectric amplifiers: carrier amplifiers, optically coupled amplifiers, current loading type isolation amplifiers, chopper amplifiers, differential chopper amplifiers. Electrocardiograph (ECG): waveform, ECG preamplifiers, defibrillator. Blood pressure measurements and electronic manometry Pressure transducers, pressure amplifiers, Systolic, diastolic and mean detector circuits, practical problem in pressure monitoring, Blood flow measurements: plethysmography, electromagnetic flow meter, Phonocardiography, vector cardiography, cardioverter and pacemakers. Measurement of human brain parameters: cerebral angiography, cronical X-ray, brain scans. Tomography & Ultrasonogram, Electro-encephalography (EEG): electrode, frequency bands, EEG patterns and EEG preamplifiers, ICU/CCU central monitoring system.

### EEE 477: DSP EMBADDED SYSTEM [3]

P EEE 403: Embedded systems have become the next inevitable wave of technology, finding application in diverse fields of engineering. Microprocessors, together with sensors and actuators, have become embeddable in almost everything. The purpose of the course is to provide the students with the basic information about embedded systems which can be defined as a control system or computer system designed to perform a specific task. The course consists of two parts being closely interconnected. The aim of the course, in its first half, is to introduce students to the theory and practice of control system engineering. The second part is devoted to the basis of microcontroller’s architecture and programming of embedded systems.

### EEE 478: DSP EMBADDED SYSTEM LAB [1]

### EEE 443: BRAIN ENGINEERING [3]

P EEE 403: Brain Science; Brain & Behavior; Neuro Linguistic Programming (NLP); Attitude Theory; Cognitive Neuroscience; Brain Waves and Signals, Memory system. Neuromorphic Computing, Brain inspired computing; System design with Neuromorphic chip; Methods for Neuroimaging; Bio-Crime etc; Brain Computer Interface like CBI, BMI, Bio-net, Bio-Money etc. Neural Networks; Biological Intelligence (BI); Brain facts on AI, Robotics, Deep Learning; Deep BrainStimulation; IOT with Brain Interface, Data Science; Neuroscience; Bioinformatics; Bio-Commerce; Bio-Marketing; Bio-Business; Bio-Education; Collective Intelligence in Biomedical Applications; Disease like Alzheimer’s; Future trend and focused possibilities.

### EEE 444: BRAIN ENGINEERING LAB [1]

### EEE 488: THESIS [6]

Study of problems in the field of Electrical and Electronic Engineering. A student needs to select a suitable topic of his/her interest or supervisors may display a list of Thesis. This course will be taken at the 10th semester or after 120 credit-hours completion.

### EEE 490 PRACTICUM [6]

This is designed for real life experience through internship for a semester in a relevant organization for BSEEE students. An internship project report is required. The report is examined and graded. There is also a comprehensive oral examination.